Why is this? Long term users of explosion-proof boxes not only have requirements for the use of gearboxes, but also consider using different explosion-proof boxes. However, when choosing to purchase explosion-proof boxes, what factors need to be considered?

If it is necessary to update the factory date of non-standard bearings, they will be used inside the box in these months. For example, if you need to order non-standard bearings, you can inquire with us.

When installing explosion-proof boxes, if it is necessary to confirm the factory date of the explosion-proof box, the factory date of the explosion-proof box should also be confirmed again. If it is necessary to confirm that there are no other abnormalities in the explosion-proof box, the factory date of the explosion-proof box needs to be confirmed again.

When using explosion-proof boxes, it is necessary to confirm whether the entry wiring of the explosion-proof box is correct, whether there is electricity or poor contact of the contacts, poor braking, etc.

Some vehicles have flat covers installed on the outer space of the box and require further inspection. In addition, first check whether certain components of the external circuit have electricity or if the contacts are burnt out, and whether the remote control has electricity or if the contacts are burnt out or have poor wiring. Then check whether there is power supply in the external circuit, whether the fuse is burnt or loose, etc. If there is no current, it indicates that the vehicle's instrument panel is normal, and whether the remote control is damaged or short circuited.

The working principle of an explosion-proof box is firstly a shell, which can be connected to the front cover plate by connecting two probes to the signal line, enabling it to compare with the data of the upper or lower display symbols of the signal line. For example, the content "d" represents current, actuator alarm, working status, vehicle control status, safety devices, fault smoke exhaust, etc., in order to eliminate faults. Secondly, there are terminals, which are divided into U/W and U/W. The corresponding battery is a positive carbon brush

What are the requirements for selling explosion-proof boxes? 1. Installation: What are the necessary procedures for selling explosion-proof boxes? The following answers can be.