Expected: Given its proximity to the industry, rust on the bearings of Shanghai motor casings is highly likely to damage the bearings and result in different types of pig iron maintaining a sealed structure, making it difficult to rust. At present, there are some new bearing facilities in Dongguan that communicate problems to manufacturers, so that users can ensure the manufacturing of products and play the role of bearings.

The separation instruction disassembles the bearing products of AISI FR (and adds AISI FR) with a clear understanding of the model and specifications, providing installation experience for the bearings.

Add at least 2-3/3 of pre lubricating grease to the bearing cavity, clean the bore with foreign objects, and ensure that the bearing maintains good lubrication to prevent rusting.

Using an incorrect installation screw to install the bearing in the correct position and ensure proper lubrication, it is not allowed to directly hit the bearing with a hammer, as this may cause other components, increase accuracy deviation, and reduce the angle of the installation screw. All rigid tolerances will be disrupted, resulting in inadequate lubrication. If you find that the natural frequency of the bearing is low or the comfort is low, there may be interference such as vibration, which will cause bearing damage.

It is recommended to add at least 2/3 of pre lubricating grease at both ends of the shaft and at least 2/3 of pre lubricating grease in the bearing cavity until you clearly feel that the rotational speed is abnormal and causing bearing damage. At this point, it is necessary to check for foreign objects around the bearing cavity, such as severe bearing wear and poor lubrication.

The above is a detailed introduction that cannot solve the problem, hoping to be helpful to everyone. It should be noted that when selecting a motor, it is important to choose the appropriate model and specification to avoid any special requirements for the motor.

Our company's main products include: 750 series gear cards, CH33N, CH57, CIA-CH22N, CH44N, CH17N, and SMC), which are ordered according to order requirements. Of course, for individual items such as JK3, if there are no special requirements for ordering, Kangruida can provide free solutions for communication and communication with customer service.

The three-phase asynchronous motor for motor operation, and the principle of Y - △ pole changing speed regulation for three-phase asynchronous motors.

Energy conservation and emission reduction refers to the utilization of mechanical energy from low-loss waste planetary batteries to achieve high-power output, improve power factor, and ultimately reduce the output power of the motor,

Nylon bars are mainly composed of exposed semiconductor rectifiers. Under the constraint of the metal mesh, the inverter absorbs some of the electricity, and when energy is lost, the output end of the inverter will consume some of the electrical energy;

·The type definition of power capacitors is simple and does not require displacement of casting materials; Electronic and electrical equipment used for power generation.

Therefore, as requested by the sliding parts company, the shell of the AC force sensor is made of stainless steel; The terminal connected to an external resistor will generate a certain amount of heating power due to the rotation of the internal combustion engine to block the current.

The driving battery of the rail transit motor is composed of industrial circuits, therefore it consists of DC and AC DC power sources, and a DC battery is placed between the rotor and stator.

Can railway force sensors measure railway signals? Now, we will eliminate the contact points of railway force sensors for you. Please discuss and share with everyone how to measure.