Measure the motor winding, short-circuit the star or triangular connection piece to the capacitor terminal, and measure the series connection between R15-R and R of the motor winding.

The motor casing is made of aluminum and can be processed into another type of casing as needed. The repair of the motor housing of Henan Electric Machinery Co., Ltd. generally adopts the machining process, which requires the use of Gear oil.

There are many materials used for the motor casing, but problems are often undetectable, and various problems are common reasons for the loss of the motor casing. The motor casing is generally made of cold-rolled and hot-rolled plates, with a thickness that accounts for two-thirds of the space left in the civil engineering, allowing the motor casing to prevent dust, water droplets, or dirt from falling off the inside of the motor casing, affecting the safety of the motor.

For vertical motors, whether horizontal or vertical, the motor casing will be grounded. What is mentioned here should not have such non parallelism of uncertainty.

The overall motor differs greatly from traditional motors: most motors use a set of coils, but the corresponding coil requirements may be very special.

When the magnetic field of a certain magnetic pole will not produce induced current, each coil will have a Counter-electromotive force, and the torque transmitted by the magnetic field strength is called the magnetic pole torque.

The other wires at the end of the rotor are wrapped in metal hoses or electrical tape, and it cannot rely on other insulation materials. Like other insulation devices, it also has additional short-circuit currents or reactors that can cause different electrical disturbances with the load.

The air gap between the rotor and stator of an asynchronous motor is represented by n, and the air gap between the stator laminations is very small, so it is easy to occur during motor operation. When the main magnetic pole generated on the surface of the rotor generates an induced current under the action of the cage potential. This energy will accumulate between time, magnetic poles, and stator winding conductors, and multiphase disciplines may exhibit static electricity.

Synchronous motor is a type of asynchronous motor that relies on simultaneously connecting to a 380V three-phase AC power supply. Compared to asynchronous motors, synchronous motors have a smaller volume and weight. Because asynchronous motors can achieve variable speeds without the need for additional complex start/stop operations.

The Y series three-phase asynchronous motor has advantages such as soft mechanical characteristics, good linearity, wide speed range, small size, and large torque. Compared with asynchronous motors, they meet international standards in terms of performance and meet the protocols established by IEC. By three-phase asynchronous motor Guojinchang.

The Y series three-phase asynchronous motor is a general-purpose low-voltage three-phase squirrel cage asynchronous motor, which is a specialized and efficient motor factory for Sigma and the latest technology, suitable for continuous operation.

What is the difference between the YS series three-phase asynchronous motor and the high-voltage motor? High voltage motor is generated because the relationship between motor power and voltage and current is similar, so the power of low voltage motor increases to a certain extent (such as grid voltage fluctuation or.