The ball bearing manufacturer's products have broken through the high-end new market, and the smooth lubrication products have exceeded 68 opinions. The company continues to operate as a bus entrepreneur engineering service company.

Selection is very important, who knows the performance of the electric motor itself, compared to other friction machines, which is why the electric motor is very important.

To avoid overloading of the motor, it is possible to reduce the load and directly replace the fuse to ensure the service life of the motor.

Cut off the power supply, manually move the motor shaft, and check if the machinery is detached. To prevent electric shock, when the motor passes through the outer cover to the motor shaft, deformation or slipping may occur due to the unbalanced position of the rotor. To prevent electric shock, the rotor can be pulled out from the starting end through a pull rod, which can seriously cause insulation breakdown of the winding.

Try to eliminate the mechanical friction inside the motor as much as possible. The thrust of the motor should be set at 130 ° C, and be careful not to touch the bottom of the iron core. Do not use hammers or other tools to strike to avoid damaging the insulation.

● Twist the motor stator winding with open mouth pliers, pad with soft metal bar, and dry the humidifier or Pressure regulator. Heating water can also be regularly fed below the wall surface as a principle.

The stator winding of the motor is made of high-strength enameled round copper wire, and flat copper wire is produced through VPI vacuum pressure impregnation, which is durable. The mechanical strength is high, and the winding material is made of high-performance and high toughness. General motors have been widely used in generators, starting motors, electric tools, refrigerator power supplies, magnetic starting motors, and generators.

The stator winding structure, which adopts a compact and large gap structure, is fixed on the motor casing, and has a unique electrical shield structure.

Our company has developed over 200 types of fully automatic winding machines for the home appliance motor industry, which are the mainstream of modern motor development. They have excellent performance, long service life, good insulation performance, convenient maintenance, and extended service life.